DRYVAC DV 800

Inlet connection: DN 100 ISO-K
Pumping speed: 800 m³/h
Ultimate pressure: 5 x 10⁻³ mbar
Voltage: 380-480 V
Please login to see prices.

Purge module:

DRYVAC DV 800

DRYVAC DV 800    380-480V, LVO 210

Dry compressing screw vacuum pump

 

Characteristics:

  • Hermetically sealed screw vacuum pump with integrated frequency converter
  • Simple mechanical and electrical integration
  • Integrated protection functions through temperature, exhaust pressure and power consumption monitoring
  • Small footprint due to compact design
  • Low energy consumption through optimised rotor geometry and innovative motor design with efficiency class IE3
  • Insensitive to particles and dust
  • High pumping speed also at high intake pressures
  • Optimised pumping speed for light gases

 

 

Technical data:

  • Nominal pumping speed: 820 m3/h
  • Max. eff. pumping speed: 800 m3/h
  • Ultimate pressure:  5 x 10-3 mbar
  • Integral leak rate: 1 x 10-4 mbar l/s
  • Weight: 590 kg approx.
  • Noise level at ultimate pressure with silencer or connected rigid exhaust line: 67 dB(A)
  • Connection flange, intake side: DN 100 ISO K
  • Connectionflange, discharge side: DN 63 ISO K
  • Electrical connection: 380-480 V / 50/60 Hz
  • Electrical capacity rating: 22 kW
  • Electricalpowerconsumption at p < 10 mbar:  7 kW
  • Pump dimensions [mm]: 1280 x 570 x 420
  • Cooling: water
  • Cooling water consumption, nominal: 10 l/min
  • Water pressure min/max: 2/6 barg (bar gauge)
  • Cooling water admission temperature: 5 - 35 °C
  • Purge gas supply pressure: 4 - 16 barg (bar gauge)
  • Purge gas nozzles Vac. side: 2.0 mm
  • Exhaust side: 0.9 mm
  • Electro pneumatic gas ballast valve (16 m3/h approx.) Oil filling motor/gear side: 1.2 l (ester oil)
  • Permissible ambient temperature: 5 - 50 °C
  • Protection class EN 60529: IP54

 

Monitoring:

  • Pressure switch on exhaust side (1.2 bar abs.)
  • Temperature pump housing
  • Temperature motor
  • Current limits through frequency converter

 

Equipment:

  • Integratedfrequency converter
  • Electro pneumatic gas ballast valve 24 VDC
  • Purge gas valves 24 VDC
  • Rubber feet
  • NRTL cTUVus in preparation

 

Media supply:

  • Electrical supply: terminal board
  • Cooling water supply: 2 x G 1/4 inch. (female)
  • Purge gas connection: D10 plug-in connection

 

Supplied equipment:

  • DRYVAC of the design asdetailed above
  • Operating medium(already filled in) LVO 210
  • Screen with O-ring for inlet flange
  • Operating Instructions

 

Accessories (available separately):

  • 112005A03 DRYVAC Rootsadapter WH 700
  • 112005A04 DRYVAC Rootsadapter WS(U) 1001
  • 112005A05 DRYVAC Rootsadapter WS(U) 2001
  • 112005A07 DRYVAC Rootsadapter for WH(U) 2500
  • 112005A10 DRYVAC Rootsadapter for WH(U) 4400/7000
  • 112005A12 Cooling Water Unit for DRYVAC 450/650
  • 112005A14 Disc Exhaust Check Valve (Spring loaded)
  • 112005A15 Non-return valve for fitting tothe exhaust
  • 119002  Silencer

Similar products

DRYVAC DV 1200 ATEX DRYVAC DV 1200 ATEX
Please login to see prices.
DRYVAC DV 1200 DRYVAC DV 1200
Please login to see prices.

Welcome to Leybold Welcome to Leybold

Please select your country. Please select your country.

Your country is not listed? Visit our global shop Your country is not listed? Visit our global shop.

Request form
Dear customer,

we are always eager to provide best service and quality. However, it cannot be ruled out, that product related questions occur. To assist you with any product related question we created a request form which enables you to contact us in the most convenient way. To retrieve the request form, please use the link below.

In cases of general questions related to our online shop, please read the shop rules first.

Best regards,
Your Leybold Team

go to request form